Last Modified: 11-29-2007 1.6 C
Service Category: Brake Section: Brake Control/Dynamic Control System
Model Year: 2008 Model: Sequoia Doc ID: RM000002017009X
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: DESCRIPTION (2008 Sequoia)

DTC

C1300/62

Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the ECU by self-diagnosis.

DTC Code

DTC Detection Condition

Trouble Area

C1300/62

Malfunction in skid control ECU

VSC actuator (skid control ECU)

INSPECTION PROCEDURE

NOTICE:

When replacing the VSC actuator assembly, perform zero point calibration BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: CALIBRATION (2008 Sequoia) .

PROCEDURE

1.

RECONFIRM DTC

(a) Clear the DTC(s) BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: DTC CHECK / CLEAR (2008 Sequoia) .

(b) Turn the ignition switch to ON.

(c) Check if the same DTC is output BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: DTC CHECK / CLEAR (2008 Sequoia) .

Result

Result

Proceed to

DTC output

A

DTC not output

B
A